Rheem MPi-325 Series II Heat Pump
Supplied & Delivered $4,247.05 – $4,847.05
- Free Delivery Within 3 Hours*
- 100% Money Back Guarantee
- Will Beat Any Written or Online Quote
- Supplying Australia Wide
Description
The Rheem MPi Series Heat Pump is suitable for moderate – warm climates and a family size of 2-5 people.
Product Features:
- Model No.: 551325
- Fitting locations make it an ideal replacement for an electric water heater
- Multi-pass heating – Heats the water ‘isothermally’ by letting the water through the heat exchanger multiple times
- Constant recovery – Minimises energy use by heating at a ‘constant’, optimised rate
- One man installation – can be fully installed by plumbing trades
- Energy-efficient – Cuts energy use and greenhouse gas emissions by up to 65%
- No Solar Panels – No structural load on your roof and looks better too
- Maximum Mains Pressure Settings with ECV is 680kPa and 800kPa without ECV
- Minimum water supply pressure is 200kPa
- Whisper technology enables quieter operation
- LED Display – Enables you to easily check the operating status of the water heater
- Heat Pump Module is 42kg
- The storage tank weighs 88kg
- The storage capacity is at 325L
- The element size is 3.6kW
- 5-year cylinder warranty
- Model No.: 551325
- Fitting locations make it an ideal replacement for an electric water heater
- Multi-pass heating – Heats the water ‘isothermally’ by letting the water through the heat exchanger multiple times
- Constant recovery – Minimises energy use by heating at a ‘constant’, optimised rate
- One man installation – can be fully installed by plumbing trades
- Energy-efficient – Cuts energy use and greenhouse gas emissions by up to 65%
- No Solar Panels – No structural load on your roof and looks better too
- Maximum Mains Pressure Settings with ECV is 680kPa and 800kPa without ECV
- Minimum water supply pressure is 200kPa
- Whisper technology enables quieter operation
- LED Display – Enables you to easily check the operating status of the water heater
- Heat Pump Module is 42kg
- The storage tank weighs 88kg
- The storage capacity is at 325L
- The element size is 3.6kW
- 5-year cylinder warranty
- The appliance may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities or a lack of experience and expertise, provided that they are supervised or they have been instructed on how to use the appliance safely and have understood the potential risks.
- Children must never play with the appliance. Children must never clean the appliance or perform user maintenance unless they are supervised.
- DO NOT DISASSEMBLE, REPAIR OR MODIFY. Do not disassemble or modify the units as this may cause fire, electric shock and other accidents. Always use a licensed plumber for installation, relocation, repair or connection to solar units.
- Do not place any flammable items on, near, or around the unit, as this can cause fire or an explosion to occur.
- Do not touch the power plug with wet hands. It can cause an electric shock.
- Do not turn off the remote controller or change the water temperature while someone is bathing or washing. That may result in scalds or burns.
| WEIGHT | 130 kg |
|---|---|
| DIMENSIONS | 63.8 × 86.3 × 163.1 cm |
| MANUFACTURER | Rheem |
| MODEL SERIES | Rheem MPi Series Heat Pump |
| PRODUCT TYPE | Heat Pump |
| HOUSEHOLD SIZE | 1-5 people |
| ENERGY RATING | 6 stars |
| NO. OF ELEMENTS | Single |
| ELEMENT POWER (KW) | 3.6 kW |
| TANK STORAGE CAPACITY | 325L |
| FIRST HOUR CAPACITY | 325L |
| TANK MATERIAL | Vitreous Enamel |
| TANK OR CYLINDER WARRANTY | 5 years |
| MADE IN | Australia |
| INSTALLATION INSTRUCTIONS | External installation |
| PRICE | Supply & Deliver Price, Supply & Install Price |
Frequently Asked Questions
- Standard Tempering Valve for all gas and electric storage water heaters
- High-performance Tempering Valve for all solar and heat pumps
- Duo Valve for all units except instant gas
- Pressure Limiting Valve for all units except instant gas
- Cold Water Expansion Valve for all units installed in QLD and SA
- Slab or Plinth for all water heaters to sit on
Yes, we can take away your old system to the recyclers for $55.
QLD and SA customers will require a certificate of compliance – we can provide this for $60.
QLD customers require an electrical connection for all electric storage units – we can provide this for $160.
- Gas and water pipe sizing nearly always needs to be upgraded and often this isn’t easy or feasible.
- On every occassion, you will require a new power circuit to be run for the instant unit as it is ignited by electric starters, whereas a standard gas storage unit doesn’t require power.
Please contact us by phone or email if you would like to discuss your purchase further.
Related Products
-
-
- Australian Made, Hot Water Today 170L Gas Hot Water System
-
Supply & Deliver Price - $1,034.90
Supply & Install Price - $1,384.90
- View Product
-
-
-
- Australian Made, Hot Water Today 135L LPG Gas Hot Water System
-
Supply & Deliver Price - $958.00
Supply & Install Price - $1,308.00
- View Product
-
-
-
- Australian Made, Hot Water Today 135L Natural Gas Hot Water System
-
Supply & Deliver Price - $992.11
Supply & Install Price - $1,342.11
- View Product
-
-
-
- Hot Water Today 26L Natural Gas Continuous Flow 50°
-
Supply & Deliver Price - $897.46
Supply & Install Price - $1,247.46
- View Product
-
Other Similar Products
-
-
- Australian Made, Hot Water Today 170L Gas Hot Water System
-
Supply & Deliver Price - $1,034.90
Supply & Install Price - $1,384.90
- View Product
-
-
-
- Australian Made, Hot Water Today 135L LPG Gas Hot Water System
-
Supply & Deliver Price - $958.00
Supply & Install Price - $1,308.00
- View Product
-
-
-
- Australian Made, Hot Water Today 135L Natural Gas Hot Water System
-
Supply & Deliver Price - $992.11
Supply & Install Price - $1,342.11
- View Product
-
-
-
- Hot Water Today 26L Natural Gas Continuous Flow 50°
-
Supply & Deliver Price - $897.46
Supply & Install Price - $1,247.46
- View Product
-
We Supply and Install in These Locations
